This option allows you to configure the installation settings of modules that will be installed on the remote machine.
Host
Adress of your host that will be used for the SSH connection.
Port
Port that will be used for the SSH connection.
Type
All operations will be grouped under each unique name of the type.
e.g.: AUDIT. If multiple instances will have the name AUDIT, all audit installations of AUDIT will be executed on all hosts
Config
Module configuration.
Installation path
Address that will be used for the installation of the selected module.
Settings for non-distributed installation
In case modules will be installed to the same machine and default settings should be used, keep the option Distributed TCP/IP Enabled selected and TCP/IP members value set to the default option 127.0.0.1.
If you want typical installation of modules used default settings for Distributed settings.